Top guide
Description
i
Length | Description | Diagram number | Code | |
---|---|---|---|---|
Top guide | 3 | 99106 | 10 |
Interline Sliding Door
Interline sliding door assembly diagrams
Diagram 1.
Mark the center heights on the strip handle as per the measurement sheet.
Mark the center heights on the strip handle as per the measurement sheet.
Diagram 2.
Fit the glass or board pannels between the H-CHANNEL, add the strip handles over the pannels and secure it through the drilled holes with selfcutting screws.
Fit the glass or board pannels between the H-CHANNEL, add the strip handles over the pannels and secure it through the drilled holes with selfcutting screws.
Diagram 3.
With a wooden flat end wedge insert the gasket into the back side of the frame with the glass pannel.
With a wooden flat end wedge insert the gasket into the back side of the frame with the glass pannel.
Diagram 4.
The bottom rollers are positioned at the back of the door and fastend with self cutting screws.
The bottom rollers are positioned at the back of the door and fastend with self cutting screws.
Diagram 5.
The top guides are positioned at the back of the door and fastend with self cutting screws.
The top guides are positioned at the back of the door and fastend with self cutting screws.
Diagram 6.
Fasten the top track at 300mm intervals with 2 screws at either end and the other screws alternating between both track sides. (Use the v-grooves as Drilling guides). Fasten fixing profile at 300mm intervals clip the bottom track over the fixing profile and secure by tapping on with rubber mallet.
Fasten the top track at 300mm intervals with 2 screws at either end and the other screws alternating between both track sides. (Use the v-grooves as Drilling guides). Fasten fixing profile at 300mm intervals clip the bottom track over the fixing profile and secure by tapping on with rubber mallet.
Diagram 7.
Tilt door and insert into top track. Swing door over the bottom track and set it down so that the wheels lie in the slots, the door can now be adjusted by the setting screws at the back of the bottom roller.
Tilt door and insert into top track. Swing door over the bottom track and set it down so that the wheels lie in the slots, the door can now be adjusted by the setting screws at the back of the bottom roller.